Product ID:UNIVOLT 60, (ELECTRICAL INSULATING OIL FOR TRANSFORMER)
MSDS Date:01/01/1988
FSC:6525
NIIN:00D003329
MSDS Number: BTTQY

EXXON COMPANY, USA, A DIV OF EXXON CORP.

800 BELL ST
HOUSTON, TX 77252-2180
US

Emergency Phone: 713-656-3424/2443 (MEDICAL)

Info Phone: 713-656-5949

Preparer: NONE

Cage: DO850

GENERAL ELECTRIC MEDICAL SYSTEMS GROUP

2180 HOUSTON, TX 77252-2180 US

Telephone: 713-656-3631

Cage: 1V332

HYDROTREATED LIGHT NAPHTHANIC DISTILLATE, PETROLEUM

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: >99%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (MIST) 9394

2,6-DI TERTIARY-BUTYL PARA-CRESOL

CAS: 128-37-0

RTECS: GO7875000

Fraction By Weight: <0.5%

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3; 9394

LD50 LC50 Mixture:ORAL LD50 (RAT) IS >5 GMS/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION. SKIN:
PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION. INHALATION:
ASPIRATED INTO LUNGS MAY CAUSE PULMONARY INJURY AND POSSIBLY DEATH.
INGESTION: PRODUCT HAS LOW ORDER OF A CUTE ORAL TOXICITY. CHRONIC:
PROLONGED OR REPEATED SKIN CONTACT REMOVES SKIN OILS LEADING TO
IRRITATION AND DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION, DEFATTING,
DERMATITIS. INHALATION: ASPIRATED INTO LUNGS DURING INGESTION OR
VOMITING MAY CAUSE MILD TO SEVERE PULMONARY INJURY AND POSSIBLY
DEATH. INGESTION: PRODUC T HAS A LOW ORDER OF ACUTE TOXICITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH SKIN WITH SOAP AND WATER. INHALATION: NOT NORMALLY A
PROBLEM DUE TO LOW VAPOR PRESSURE. IF OVERCOME BY VAPOR FROM HOT
PRODUCT, MOVE TO FRESH AIR AND RESTORE NORMAL BREATHING. GET
MEDICAL ATTENTION, IF NEEDED. INGESTION: DO NOT INDUCE VOMITING.
GET MEDICAL ATTENTION.

Flash Point Method:COC
Flash Point:293F,145C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CARBON
DIOXIDE, VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. IF LEAK OR SPILL HAS NOT IGNITED, USE WATER SPRAY TO DISPERSE
VAPORS AND PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:USE SUPPLIED-AIR BREATHING EQUIPMENT FOR
ENCLOSED OR CONFINED SPACES OR AS OTHERWISE NEEDED. DO NOT STORE OR
MIX OIL WITH STRONG OXIDANTS.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH, OR
OTHER SUITABLE ABSORBENT TO SPILL AREA. KEEP PRODUCT OUT OF SEWERS
AND WATERCOURSES BY DIKING OR IMPOUNDING. ADVISE AUTHORITIES IF
PRODUCT HAS ENTERED OR MAY ENTER SEWERS, WATERCOURSES, EXTENSIVE
LAND AREAS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT, SPARKS, FLAME, STRONG OXIDANTS. NO
SMOKING OR OPEN LIGHTS.
Other Precautions:USE OIL PRODUCT WITH CAUTION AROUND HEAT, SPARKS,
PILOT LIGHTS, STATIC ELECTRICITY, AND OPEN FLAME. EMPTY OIL DRUMS
RETAIN RESIDUE AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD,
BRAZE, SOLDER, DR ILL, GRIND, EXPOSE TO IGNITION SOURCES.

Respiratory Protection:NONE NORMALLY REQUIRED. USE SUPPLIED-AIR
RESPIRATORY PROTECTION IN CONFINED OR ENCLOSED SPACES, IF NEEDED.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO PREVENT EXCEEDING
RECOMMENDED EXPOSURE LIMIT OR BUILDUP OF EXPLOSIVE CONCENTRATIONS.
Protective Gloves:USE CHEMICAL-RESISTANT GLOVES,IF NEEDED.
Eye Protection:GOGGLES/FACE SHIELD IF CONTACT MAY OCCUR
Other Protective Equipment:NONE NORMALLY REQUIRED.USE
CHEMICAL-RESISTANT APRON/OTHER IMPERVIOUS CLOTHING,IF NEEDED TO
AVOID CONTAMINATING CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THIS NSN IS FOR AN ELECTRICAL TRANSFORMER THAT IS MANUFACTURED IN
FRANCE. THIS MSDS DATA IS FOR THE ELECTRICAL INSULATING OIL IN THE
TRANSFORMER.

HCC:N1
Boiling Pt:B.P. Text:480F,249C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.87
Viscosity:55 SSU
Evaporation Rate & Reference:<0.01 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, WATER-WHITE LIQUID. FAINT PETROLEUM
HYDROCARBON ODOR.
Percent Volatiles by Volume:NEG.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS SUCH AS LIQUID CHLORINE,CONCENTRATED
OXYGEN,SODIUM HYPOCHLORITE,CALCIUM HYPOCHLORITE.
Stability Condition to Avoid:HIGH TEMPERATURES AND OPEN FLAMES. WILL
NOT REACT VIOLENTLY WITH WATER.
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, ALDEHYDES, OTHER DECOMPOSITION PRODUCTS, IN CASE OF
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. EMPTY OIL DRUMS SHOULD BE COMPLETELY
DRAINED, PROPERLY BUNGED AND PROMPTLY RETURNED TO A DRUM
RECONDITIONER. ALL OTHER OIL CON TAINERS SHOULD BE DISPOSED OF IN A
SAFEMANNER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.